glad spray

Netzmittel für die Gusstechnik

Für glatte und blasenfrei Güsse

Einfache Handhabung durch Aufsprühen, dadurch keine Beschädigung des Gussobjekts.

Related Products

  • Automix1 cartridge system

    Automix1 cartridge system

    Mixing gun, Mixing cannulas, Intra-Oral-Tips, Contouring tips

  • Automix2


    Mixing gun, Mixing cannulas, Intra-Oral-Tips, Contouring tips

  • Cabadol


    for safe disinfection of instruments. Prevents metal corrosion (also for a longer period of time).

  • Catalysts


    for C-silicones, with new hardener matrix, hypoallergenic, pleasant odour and taste.

  • Cavidex®


    for rinsing and drying cavities and dies. Cavidex® facilitates an optimal adhesion of filling materials. Medical device Cl. IIa

  • Deta-Cut


    curved, for time saving cutting out of thin and equal flow off grooves in preliminary silicone based impressions.

  • Detaferm®


    with calcium fluoride for the remineralisation of teeth.

  • Detaseal® Adhesive rapid

    Detaseal® Adhesive rapid

    metal and individual trays, fast drying (approx. 1-2 min.).

  • Detaseal® antilock

    Detaseal® antilock

    prevents blocking of undercuts, thin-flowing, soft consistency. Facilitates reliable demoulding and removal from the mouth, also in case of pronounced retention areas in the impression zone.

  • Detaseal® bite

    Detaseal® bite

    stays on the impression or preparation. Direct application onto teeth, does not flow into interdental spaces.

  • Detaseal® function

    Detaseal® function

    for functional impressions and functional border moulding. Addition curing, putty.

  • Detaseal® hydroflow Xlite

    Detaseal® hydroflow Xlite

    extra light-flowing consistency. Precise detail reproduction, particularly in moist impression regions with ultimate hydrophilia.

  • Detaseal® hydroflow heavy

    Detaseal® hydroflow heavy

    high consistency, hydrophilic, stable, easy to remove because of medium final hardness and high elastic recovery from deformation.

  • Detaseal® hydroflow lite

    Detaseal® hydroflow lite

    easy-flow consistency, ultimate hydrophilia, highest possible wetting capacity immediately after starting mixing (contact angle < 10°).

  • Detaseal® hydroflow mono

    Detaseal® hydroflow mono

    medium tray consistency for single step impression-taking or mixed technique, with distinct snap set.

  • Detaseal® hydroflow putty

    Detaseal® hydroflow putty

    very high consistency, kneadable. Soft initial consistency for perfect mixing results. Ideal for preliminary impressions in the double impression technique and as a tray material in the double-mix technique.

  • Detaseal® hydroflow soft2 putty

    Detaseal® hydroflow soft2 putty

    high consistency, kneadable. Fluffy-soft initial consistency with simultaneously reduced final hardness (60 Shore A).

  • Drala® Phosphate Cement

    Drala® Phosphate Cement

    for fixing of crowns, bridges and inlays.

  • Drala® Polycarboxylate Cement

    Drala® Polycarboxylate Cement

    for fixing of crowns, bridges and inlays, cavity lining for pulp protection, good bonding and flow properties.

  • Drala® eco

    Drala® eco

    for cementing crowns, bridges and inlays as well as cavity lining to protect the pulp.

  • Esthetic Mask

    Esthetic Mask

    A-silicone based, for the fabrication of master models and working casts in the dental technique, cold curing, high dimensional stability and tear strength.

  • Fermin


    for provisional sealing.  Setting in the mouth under the effect of saliva.

  • Flexistone®


    C-silicone based, light bodied, excellent stability, very high final hardness (75 Shore A). For insulating acrylic or porcelain teeth during investing.

  • Flexistone® Plus

    Flexistone® Plus

    A-silicone based, light bodied, excellent stability, very high final hardness (85 Shore A). Optimum flow properties during spatulation.

  • Freeform®


    Ready-to-use modelling resin, light-curing for multiple indications (e.g., drilling and X-ray templates, splints, base plates, transfer keys). Radiotransparent, can be sterilised and disinfected, biocompatible

  • Freeprint® cast

    Freeprint® cast

    for the generative fabrication of cast objects using precision casting technology. 

  • Freeprint® model

    Freeprint® model

    for the generative fabrication of dental models. 

  • Freeprint® model T

    Freeprint® model T

    for the generative fabrication of dental models for the thermoforming technique. 

  • Freeprint® ortho

    Freeprint® ortho

    for the generative fabrication of base parts for orthodontic apparatuses, drilling and X-ray templates, occlusal and fixation splints.

  • Freeprint® splint

    Freeprint® splint

    for the generative fabrication of drilling templates for implantology, X-ray templates and occlusal splints.

  • Freeprint® temp

    Freeprint® temp

    for the generative fabrication of temporary crowns & bridges.

  • Freeprint® tray

    Freeprint® tray

    for the generative fabrication of individual impression and functional trays and base resin plates.

  • Gingivamoll®


    heat-curing, for the fabrication of flexible gingival epithesis as a temporary replacement for the receded gingiva – after periodontal treatment.

  • Implant Mask / scan

    Implant Mask / scan

    for manufacturing flexible gingival masks for implant procedures. Free-flowing, dimensionally stable, tear-resistant.

  • Impression syringe

    Impression syringe

    for fast and exact application of light bodied impression materials. Tip can be angled and cut to provide larger orifice. Thus greater volume of flow can be reached, max. volume 4 ml.

  • Inlay Trays

    Inlay Trays

    for making safer impressions, mechanically improved tray retention.

  • Itopol / Oropol

    Itopol / Oropol

    non-greasy, water-soluble and non-smearing.

  • Lustrol


    for sealing and smoothing of permanent soft mollosil® and Molloplast® B silicone based relinings.

  • Mixing pad / Spatula

    Mixing pad / Spatula

    Mixing pad vellum paper (P) or plastic coated (K), 30 sheets, with scaling, in two sizes, sheets separable.

    Disposable plastic syringe for fast and exact application of light bodied impression materials.

  • Molloplast® B

    Molloplast® B

    for processing in dental laboratories. One-component silicone, heat curing, microwave-polymerising, wide indications (e.g. for obturators, mouth guards, etc.).

  • Molloplast® Remover

    Molloplast® Remover

    for fast and secure dissolution of the bonding between elastic relining materials and the denture acrylic.

  • Molloplast® Rotating Tools

    Molloplast® Rotating Tools

    Grinding sleeves for smoothing and removing of uneven spots and for final finishing of permanent soft relining materials and silicones.

  • Permaliner


    for the permanent lining of dentures. Permanently soft with reduced polymerisation time.

  • Primo


    increases and ensures the bonding of Molloplast® B to the denture base.

  • blue eco

    blue eco

    addition curing, very high, easily kneadable consistency. Precise detail rendition, stable in shape and volume, smooth, heat-resistant up to 200 °C, standard final hardness 86 Shore A.

  • blue eco scan

    blue eco scan

    addition curing, high, smooth consistency, non sticky. For powderless digital 3D data acquisition of the counter bite.

  • blue eco stone

    blue eco stone

    high viscosity, smooth initial consistency. High definition, dimensionally stable, especially smooth, heat-resistance up to 200 °C.

  • compact lab putty

    compact lab putty

    smooth initial consistency, high final hardness (90 Shore A), thermoresistant.

  • easyform LC gel / paste

    easyform LC gel / paste

    light-curing, as gel or paste, MMA-free. Very high fitting accuracy for multiple indications, particularly for casting.

  • exaplast


    based on C-silicone, universally applicable for all impression techniques.

  • glad spray

    glad spray

    for the casting technique, for smooth and bubble-free castings.

  • glassbite


    A-silicone based. Medium consistency – medium bodied, thixotropic. Direct application onto teeth.

  • good morning spray

    good morning spray

    solution for A-silicone based relinings, inhibits plaque and delays accumulation of oral microorganisms for 24 hours, without any adverse effects on the natural oral flora.

  • greenbite apple

    greenbite apple

    A-silicone based, medium consistency – medium bodied, thixotropic. Direct application onto teeth, does not flow into interdental spaces, easily removed from mouth.

  • greenbite colour

    greenbite colour

    A-silicone based, with visual setting check. The colour change from green to yellow indicates that the setting process is completely finished. Medium consistency – medium bodied, thixotropic.

  • hydro C

    hydro C

    based on C-silicone for two-step impression technique and two-step putty-wash technique, hydrophilic. Visual check of measuring and mixing with Colour-Safety system.

  • implantlink® semi Classic

    implantlink® semi Classic

    for fixing long-term temporary dentures on a resin base 4:1, for frictionlocked, chewing-stable cementing of superstructures. Undamaged removal by perfectly matched adhesive properties, significantly lower displacement resistance than conventional cements.

  • implantlink® semi Forte

    implantlink® semi Forte

    for superstructures on a resin base 4:1, specially designed for semipermanent fixing on customised abutments, abutments with reduced adhesion surface or particularly small abutments. With reinforced adhesion and compressive strength.

  • implantlink® semi Xray

    implantlink® semi Xray

    based on plastic 4:1, for securing suprastructures. Radiopaque with enhanced adhesion and compressive strength, even with extended wear.

  • milkbite


    resistance-free bite registration with particularly light-creamy, airy initial consistency. Thixotropic formulation, stable, extra low extrusion pressure.

  • modell spray

    modell spray

    for the model cast technique, for smoothing, hardening and sealing of model surfaces.

  • mollosil®


    for chairside use, A-silicone based, permanently soft, cold curing. Secure bonding to the denture acrylic.

  • mollosil® plus

    mollosil® plus

    for chairside use, A-silicone based, cold curing, bio-compatible. The material is directly applied from the cartridge onto the denture base.

  • monoprint supra

    monoprint supra

    medium consistency, with activated surface, specially designed for implantology and fixation impressions with combined prosthetics.

  • onetime perfect

    onetime perfect

    for the one-step technique. Extremely short intraoral setting time (2 min.) due to thermally controlled setting.

  • silaplast Futur

    silaplast Futur

    – ideal final hardness and elastic strength. Multi-purpose use, e.g. preliminary impression material for corrections of preparations, overimpression of copperband impressions.

  • silasoft® Normal

    silasoft® Normal

    low consistency – light bodied, new type of formula, for correction of preliminary impressions, for the double-impression and double-mix technique.

  • silasoft® Special

    silasoft® Special

    with optimised formula, low consistency – light bodied, for correction of preliminary impressions, for the double impression and double mix technique.

  • silasoft® direct

    silasoft® direct

    for correction of preliminary impressions. Low consistency,light bodied, normal setting. Direct detail reproduction due to its excellent flow properties, hydrophilic.

  • sili Adhesive

    sili Adhesive

    For adhesion of condensation curing impression materials to plastic, metal and individual trays.

  • sili Adhesive/ Solvent

    sili Adhesive/ Solvent

    Adhesive for adhesion of condensation curing impression materials to plastic, metal and individual trays, extremely fast drying (approx. 1 min.). Medical device Cl. I
    Colour: blue-transparent           

  • silone®


    medium consistency – medium bodied, for all dentulous impressions.

  • smartclean


    for use after professional cleaning and pretreatment, delays formation of plaque.

  • smartfluorid® laquer

    smartfluorid® laquer

    with amino fluoride and additional long-term effect due to the formation of a calcium fluoride depot.

  • smartprotect®


    Prevents and rapidly alleviates enamel and dentinal hypersensitivity for temporary restorations, sensitive cervical areas.

  • smartprotect® soft

    smartprotect® soft

    of a new generation, oxalate based, for necks of teeth, enamel and dentine. Its mineral active substances ensure an effective sealing of the dentinal tubules.

  • smartrepair® rosa

    smartrepair® rosa

    light-curing. For aesthetic adjustments and corrections of the gingival region of temporary crowns and bridge restorations or chairside repairs of acrylate prostheses.

  • smartrepair® system

    smartrepair® system

    for tempofit®, light curing, ideal consistency. For fast and precise repairs, delivered in economic direct application syringes with interchangeable application needles.

  • smartseal® & loc / F

    smartseal® & loc / F

    with wet-bonding technology, composite-based for permanent sealing of fissures and enamel defects. Moisture tolerant, hydrophilic.

  • smartseal® cervi

    smartseal® cervi

    to protect exposed, hypersensitive root dentine. Increases mechanical stability, forms an effective erosion barrier and lowers the cervical sensitivity of root dentine.

  • smartseal® etch

    smartseal® etch

    37 % phosphoric acid content for conditioning the tooth enamel.

  • sta-seal


    medium consistency – medium bodied, for edentulous impressions,

  • sta-seal f

    sta-seal f

    high consistency – heavy bodied, for functional impressions and functional border mouling.

  • tempofill® 2

    tempofill® 2

    for temporary treatment of cavities and fillings (inlay/onlay technique and veneers). Direct, cost-effective dispensing from a syringe. Can be very easily condensed and contoured due to its soft, elastic consistency.

  • tempofit® duomix

    tempofit® duomix

    self curing, for short- & long-term provisionals. Pressure and abrasion resistant, normal setting, highest occlusal fitting accuracy.

  • tempofit® finish

    tempofit® finish

    for surface sealing of temporary crowns and bridges. “Paint on” polish for chairside use by blue light polymerisation.

  • tempofit® premium 10:1

    tempofit® premium 10:1

    self curing, for high-quality temporary crowns and bridges and long-term temporaries. Natural dental aesthetics, brilliant translucent shades, even in variable light conditions.

  • tempofit® regular 1:1

    tempofit® regular 1:1

    self-curing, for accurate short and long-term tem-porary prosthetics. Natural translucent tooth aesthetics, with long-term colour stabiliser.

  • tempofit® semi 10:1

    tempofit® semi 10:1

    for high quality long-term temporary prosthetics, 10:1, self-curing.

  • tempolink® clear

    tempolink® clear

    resin based 4:1, dual curing. Film-forming, therefore highest marginal tightness and easy removal. Distinctly reduced displacement resistance than with common cements.

  • tempolink® single

    tempolink® single

    polycarboxylate based 1:1, for crowns and bridges, inlays and onlays, zirconium works, self-curing, eugenol-free, thixotropic. Optimum flowability due to its hydrophilic formulation.

  • trayloc A

    trayloc A

    for A-silicones, very high adhesion with thincoated surface conditioning, cementfree.

  • xynon


    Insulates plaster, resin, metal and porcelain from wax.


Welcome at DETAX online – Your specialists for medical material.

For over 60 years, we have been developing silicones and light-curing resins for dental and other medical applications. The polymer chemistry of materials is our universe.

Carl-Zeiss-Str. 4
76275 Ettlingen

Phone +49 7243 / 510-0
Fax +49 7243 / 510-100


BRAND PRODUCTS DENTAL: Molloplast® B · implantlink semi® · mollosil® · mollosil® plus · Detaseal® hydroflow · Detaseal® hydroflow Xlite · Detaseal® antilock · Detaseal® soft2putty · Detaseal® function · smartprotect® · smartprotect® soft· smartseal® cervi · smartrepair® · smartfluorid® · silasoft® · silaplast · sta seal f · Fermin · tempofill® · tempofit® · Permaliner · pixelbite · milkbite · Detaseal® bite · glassbite · greenbite® colour · greenbite® apple · monoprint supra · onetime perfect · Lustrol® · Drala® · Cavidex®  · easyform · blue eco · blue eco scan® · Flexistone® · Gingivamoll® · Implant Mask BRAND PRODUCTS AUDIO: addition ultra® · addition supra® · addition spectra · addition protect · pink mix · detax flextime® · addition mini · aquaplus® · protect mold  · softwear® 2.0  · earflex® rainbow  · earflex® clear · earflex® rose · bioplast · direct mold · aqua coat · frosty coat · super coat · microporlack · durosil® · duglasil® · duglasil® express · acrylon® · smartclean® foam · smartclean® tabs · smartclean® pen · smartclean® · smartcare® BRAND PRODUCTS 3D:  luxaprint® 3D shell · luxaprint® 3D mould · luxaprint® 3D cast · freeprint® shell · freeprint® mould · freeprint® cast · Cast Separator 2.0 · luxaprint® shellac · luxaprint® shellac color · freeprint® model · freeprint® cast · freeprint® splint · freeprint® ortho · freeprint® c&b

Detax. As a brand, this name stands for high-quality medical devices. For over 60 years, we have been developing silicones and light-curing resins for dental and other medical applications. The polymer chemistry of materials is our universe. Our enthusiasm and innovative strength is ingrained in every one of the products that you will become familiar on this Website.

read more

We develop hydrophilic impression making silicones for every indication (corrective and double mix technology, kneadable working impression making for functioning rim design, sandwich technology, monophase impression making). Precision impression making materials of lightly flowing consistency with ideal flow characteristics, maximum wetting power, and elastic resilience. Regular set, fast set or super fast set with thermoactive setting characteristics and a defined snap set, kneadable putty, color violet with wildberry flavor. Ear impression making silicones in 50 ml double cartridges specially for IO/CIC changes with lightly flowing starting consistency, even for narrow auditory canals or patients with chronic pain. Ear impression making silicones for children and young people (paediatrics), pressure-less impression, no ingress of soft tissue. Ear impression making material for hearing-protection adjustments, low squeezing pressure, stable, does not run out of the ear, short time in the ear, skin friendly, non adhesive. Highly elastic resilience, easy to remove, 35 Shore A monophase impression making silicone in medium tray consistency. Harmonized consistencies of tray and corrective material. Transfer silicones, quick-setting and clearly transparent A-silicone base bite registration material, medium flow, thixotropic, to be applied directly on the row of teeth, no flowing away into interdental chambers, X-ray transparent matrix material, crystal clear, final hardness 80 Shore A, for light hardening of composites. Scannable VPS bite registration material for the powder-free 3D data acquisition for all CAD/CAM/CIM processes (stripe light projection, laser triangulation and CEREC), 32 Shore D, short time spent in the mouth. Permanently plasticizing relining silicones, direct relining in the dental practice chairside or for processing in the dental laboratory. Broad indication spectrum (obturators and mouth guards) with plaque inhibitors, clinically tested and scientifically documented. Secure bond to prosthetic acrylate. Additional crosslinking duplicating silicones and laboratory plasticines 85 Shore A for precasts, control bites, fixing of artificial teeth, models for prosthetic repairs. Permanently elastic otoplastic silicone, buoyant, direct fitting of water plugs and ear canal plastics, for the indirect manufacture of soft HdO and protective plastics, for PNP, 3D cast technology, permanently keeps its color. Even with extended processing time for series manufacture in the obtoplastics laboratory. Air-drying silicone paint for water plug plastics antibacterial with silver particles. Bis-acrylic composite 10.1 for temporary crowns, bridges and long-term temporaries with elastic phase and maximum and flexural and abrasion resistances, low polymerization temperature, translucent colors: A1, A2, A3, A3,5. Composite-based fissure sealant with wet bonding technology. Protective lacquer for exposed root dentine with high degree of cross-linking based on multifunctional (meth)acrylate has a desensitizing effect, forms a barrier against erosion, thereby reducing cervical sensitivity. Transparent fluoride varnish with amino-fluoride, mouth wash. Flexible gum masks for dental master and saw models, dimensionally stable, for a naturally aesthetic gingival look in tubes or cartridges. Dental cements for definitive and semi-permanent implantation, fasteners, long-term temporary fixing cements, plastic-based radio-opaque, cementation of supra-constructions, dual hardener system. Ready-to-use modeling resin, as a gel or paste, MMA-free, combustible without resins, no polymerization shrinkage. Gum epithesis material, hot curing. Kneable UV plastics for manufacturing biocompatible splints & templates. Plastics for 3D print systems: dentistry models, casting objects, IIa-class clear transparent resins for biocompatible implant templates and splints, KFO (DIN) base parts, long-term temporary K&B composite and supplies in total prosthodontics

© 2018, DETAX Ettlingen, Germany